Dry Break Snabbtankning Dunkar

Beskrivning

Dry Break möjliggör snabb påfyllning utan att skapa en röra. Han-sidan på Dry Break Proben ansluts till en dunk och den hon-sidan (mottagaren) installeras på fordonets bränslepåfyllning. När de två kopplingarna går ihop öppnas och stängs båda ventiltätningarna med synkroniserad timing och förhindrar all bränsleläckage. Dessutom är det inte längre nödvändigt att övervaka påfyllningsprocessen när Dry Break används i kombination med 20-0535 Radium DSV-ventilen eftersom ventilerat luftflöde automatiskt stänger av påfyllnaden när det är fullt. OBS: Radium Engineering Dry Break är kompatibla med andra Dry Break av samma storlek.

Se bloggartikeln för mer information om fyllning av bränsleceller.

20-0496 DRY BREAK, 1.5IN, MALE

Designed to install onto the fill spout of a dump can fuel jug. Anodized aluminum construction with stainless steel hardware featuring a 1.5″ OD barb. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

Specifications:

Filler Hose Requirement: 1.5″

Mate: 20-0495-V, 20-0504-V, 20-0549-V

20-0495-V DRY BREAK, 1.5IN, FEMALE, DIRECT MOUNT, VENTED

Designed for direct mounting onto a fuel cell. For mating, a 6-bolt flange with a 2.18″ PCD bolt circle (as found on the FCST) is required. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as an aluminum housing, stainless steel hardware, and a gasket. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

Specifications:

Height: 3.43″ (Dry Break to Gasket)

Mate: 20-0496 Dry Break, 1.5in, Male

20-0504-V DRY BREAK, 1.5IN, FEMALE, REMOTE MOUNT, VENTED

Designed for remote mounting to an external surface such as a fender. Requires a 77mm (3.03″) hole to be fabricated. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as a gasket, stainless steel hardware, an aluminum housing and aluminum nut ring. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

Specifications:

Filler Hose Requirement: 1.5″

Flange Outer Diameter: 4.75″

Bolt Circle Diameter: 4.25″ PCD

Height: 4.08″ (Dry Break to Barb)

Mate: 20-0496 Dry Break, 1.5in, Male

20-0549-V DRY BREAK, 1.5IN, FEMALE, VENTED

Threaded specifically to install into a Radium female dry break mount (not included). Anodized aluminum construction with stainless steel hardware and bronze bushings. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

Specifications:

Mates to 20-0496 Dry Break, 1.5in, Male.